|
Re: Need a quality US Made HEI recommendation for my 250 I6
My experience is that modules either work or they don't. Plus it is usually something else such as a high resistance in the secondary that kills them.
Take a real close look at the wires where they connect to the terminals and coil end on the pickup coil. I had that proven to me back in the late 70's when they were still pretty new. Even when they were only 3 years old those wires were failing at the conection.
The Napa Echlin module or other ign parts used to be good but who know who makes them now.
I'd trust the Accel 35361 but they aren't cheap. I've never had an issue with Accel ign parts.
__________________
Founding member of the too many projects, too little time and money club.
My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
|