|
Re: 60-62 I6 to V8 swap questions
For a bellhousing you will want one from a '63-'67 as those have the smaller center hole for the trans front bearing retainer. The '68 and up have the larger 5-1/8" center hole.
As for the motor mounts and brackets. If you want to use the better '73 and up style motor mounts, you will want the brackets from a C20 or C30. Those are shorter and fit the early frames better. However since you have a '60-'62 you will still need to add a spacer on top of the frame.
|