Re: 1957 Chevy 3600 Mild Custom Build
Thanks guys.
Got the driver side door aligned and gapped for the most part. Started to work on the driver side fender to door gap. The goal is a uniform straight 3/16" gap all around the door and fender to cab. I had to fabricate the upper fender mount to cab because the cage nuts that were originally on there were welded directly to the fender by the previous rebuilder. I welded a 3/8 square nut to the bottom of a sheet metal cage and then welded it onto the cab over the location of the old mount. I was able to get the height of the fender pretty close with some shims.
|