[RobinHood]

Hey washington blue,
When I was using the C10 frame initially, I didnt adjust the wheel base any at all from stock because the truck wasnt going to be lowered to the point where the wheels would be set high into the wheel wells. When I set the cab mounts up using the C10 frame, I used the same front wheel center hub to cab mount distance measurement as stock. When I switched back to the original frame, I did move the front wheelbase 2" forward from the cab mount location because I planned to have it significantly lower. I have a feeling it might be 1/2" too far forward, but it also depends on the wheel size I will actually be running and I think that is one of the things that maybe only I will notice. Thanks for checking out my build!