The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Mattchu60 · 06-21-2017, 10:13 AM

If you put the HT383 on the ECM will need to be re-tuned to run it. You can try the chip route. Or you could do something like a megasquirt or EBL Flash. I run the EBL flash system from Dynamic EFI - its a steep learning curve but once you "get it" then its easy to use. I also bought a Wideband O2 sensor which helped a ton for tuning the TBI. I have no idea but I was running about 16:1 AFR at WOT - which is bad news. I have an adjustable fuel pressure regulator so I cranked it up to 16 lbs and a lot of tuning later it really made it come alive.

06-21-2017, 10:13 AM	#3
Mattchu60 Registered User Join Date: Jan 2014 Location: Swaledale, IA Posts: 484	Re: 1991 TBI and HT 383 If you put the HT383 on the ECM will need to be re-tuned to run it. You can try the chip route. Or you could do something like a megasquirt or EBL Flash. I run the EBL flash system from Dynamic EFI - its a steep learning curve but once you "get it" then its easy to use. I also bought a Wideband O2 sensor which helped a ton for tuning the TBI. I have no idea but I was running about 16:1 AFR at WOT - which is bad news. I have an adjustable fuel pressure regulator so I cranked it up to 16 lbs and a lot of tuning later it really made it come alive.