|
Re: What master cylinder for rear disc swap?
Quote:
Originally Posted by oldman3
Someone can correct me if I wrong, but Corvettes have had 4 wheel disc. for years, couldn't you use one of those. I believe both front and rear bowls are the same size, should look something like this pic...Jim
|
Not sure why I never thought about a corvette master cylinder. I did a little research on them, found that 65-up corvettes came with 4 wheel disc brakes. 65 & 66 still had single bail MC's while 67-up came with dual bail. 67-76 used the same P/N MC, and 77-82 used a different P/N MC. I'm not sure what the difference is between the 67-76 & the 77-82 because they are the same physical size and have the same specs, but it sounds like either one of them would work for me. As for the aftermarket MC's such as Wilwood or SSBC I don't really see any advantage to those over a stock one.
__________________
Zach
1970 Chevrolet Custom Camper K20
1971 GMC Super K2500, 12V/NV4500 swap in progress
1971 Chevrolet Custom C10
1972 Chevrolet Custom Deluxe C20, 5.3/4L60E
1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi
2004 GMC Sierra 2500HD, LB7/Allison, CCSB
2005 GMC Sierra 1500, 5.3/4L60E, CCSB
|