|
TH350 shift linkage?
So I just installed a 350 and TH350 in my 82 C10. Also have a rebuilt auto trans steering column.
I assumed I'd be able to use a Lokar shift linkage kit with a straight rod and heim joints on the ends. However, it's not a straight shot from the lever on the bottom of the column to the trans.
Other than an expensive cable setup, or overpriced and worn-out stock linkage, do you have any suggestions?
__________________
Mike
1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes.
1982 C10 SWB -- sold
1981 C10 Silverado LWB -- sold, but wish I still had it!
1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming.
Retired as a factory automation products salesman.
Worked part-time over the years for an engine builder and a classic car repair shop.
Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!
|