The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BIGglaSS · 04-24-2018, 08:16 AM

That will work. The dash speakers will be over-powered, but that is OK. Turn the gain all the way down, and adjust the HU fade until the front and rear is balanced.

You mentioned low pass filter a couple times. That clarion 4-channel does not have LPF, only HPF. Set the HPF to about 100hz, and when you get the sub amp, set the LPF to about the same.

My W is TH400, dual gate, black buckets, A/C, power brakes. Yes, its real. Platinum with no vinyl top or wing spoiler. I still have all the original W parts. The engine was packed solid with mouse nest. Going to rebuild it with roller cam, rockers and TBI. Everything else is staying stock.

04-24-2018, 08:16 AM	#13
BIGglaSS Registered User Join Date: May 2014 Location: ID Posts: 663	Re: Setup question with what I have That will work. The dash speakers will be over-powered, but that is OK. Turn the gain all the way down, and adjust the HU fade until the front and rear is balanced. You mentioned low pass filter a couple times. That clarion 4-channel does not have LPF, only HPF. Set the HPF to about 100hz, and when you get the sub amp, set the LPF to about the same. My W is TH400, dual gate, black buckets, A/C, power brakes. Yes, its real. Platinum with no vinyl top or wing spoiler. I still have all the original W parts. The engine was packed solid with mouse nest. Going to rebuild it with roller cam, rockers and TBI. Everything else is staying stock.