Re: Weld-On Hood Scoops
It would work just fine spot welding it in, slowly, taking yer time...problem is...the hoods on '73-87 trucks are so large and flat, that the vibration and flexing the hood sees will most likely start cracking the filler and paint along the seams....
I've also seen a hole cut large enough to install scoop from bottom, and lap welded in...this creates a stronger flange and will be less likely to crack paint along joint. Guys will say to butt weld everything, but in reality most panels/floors/etc are flanged from factory and when done properly you will have no issues...
Unless ya find a good metalman who can hammer weld it and metal finish it.
There is also a hood made with that scoop already on it...
__________________
Pinstriping by Josh
'78 Chevy Silverado SWB (lowered, 454)
'90 Chevy Sport Truck
'68 Dodge Charger R/T
1930 Ford Model A
Last edited by 69BBsuburban; 07-01-2010 at 06:42 PM.
|