Quote:
Originally Posted by dsraven
the front and rear brakes on the eldorado from 77 have an 11" brake rotor and a 1 1/8 bore master cyl. it looks a lot like the corvette or like your cyl except a taller res. you can check it out online at napaprolink.ca or stop in for an eyeball check. what diameter are your front brake rotors?
|
Rear end is a 1980 Pontiac Trans Am w/rear disc brakes. From what I can find online rear rotors are 11.16. I picked those up from bumper to bumper.
The front end is TCI mustang II front end and I would need to measure the rotors for the correct size. There website install instructions say they could be
4.75” Bolt circle 10.5” rotors = 12mmx1.5(’82-’87 Camaro)
4.75” Bolt circle 11” rotors = 7/16”x20(’75-’80 Granada redrilled)
If I picked up a corvette MC will it bolt up to this booster? MBM website says its a 7" Dual Diaphragm Booster if it is truely a PBUFMCT4754 setup.