|
Re: Gen 3 Drive By Wire cruise control HOW TO
That's awesome for the drawing Nova!!
I did speak to DD y and the tech walked me through some checking yesterday and with the switch wired independent from the truck the lights and switch worked perfect!
So I hooked up the white and grey and red to 12v, blue and black to ground, still turns on and worked correctly. Hooked up the brown to the "Cruise On" and as soon as I turn on the ign. the orange light comes on.
Called DD back again, Now he is telling me to put 2 micro facet copasitors 1 between the red and ground wires and 1 between the white and ground!
I will try your setup today and see what happens, hopefully it will work out!
Thank's again for the reply and drawing
Mark
|