Quote:
Originally Posted by KRFitz
Does the motor mounting position come down to what a guy plans on doing with the fan? I have seen electric push fans used on the front side of the rad. Does this allow enough room to use the flipped V8 mount option, or do you still suggest the full 8" move.
|
I moved my first one 5.5 inches and there was no room for the clutch fan but I was able to offset an electric fan to fit as a puller. I moved my second one 8.5 inches and the clutch fan barely fit.
both of those were 4.3. which is a good point to bring up. the engine mounts are in different places on the block on 4.3 vs V8s. the V8 mount is very forward, the 4.3 is more to the middle of the block so flipping S10 V8 mounts moves a V8 rearward more (its like an 8 inch total move on a V8) than a 4.3.
I guess what I am saying is, if the mounts were in the same place on V8s and 4.3, using the swap mounts would move it enough, but if they were in the same place on V8s and 4.3, swap mounts wouldnt exist!