The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 55.2-59 camaro clip crooked?

56 3100 · 01-05-2021, 07:14 PM

hey everyone.MARTINSR i made tram gage based on what you posted from 1/2 conduit. here are some points i measured on truck frame and camaro clip. i measured from leading edge of holes be ok do you think? cab mounts and rivets are one point to go by based on frame drawing some have posted around the forums. i went by some other holes in crossmembers and frame to shock mount s very little to no variation on measurements. will do some more cross measuring.

01-05-2021, 07:14 PM	#18
56 3100 Registered User Join Date: Jan 2005 Location: dartmouth,nova scotia,canada Posts: 332	Re: camaro clip crooked? hey everyone.MARTINSR i made tram gage based on what you posted from 1/2 conduit. here are some points i measured on truck frame and camaro clip. i measured from leading edge of holes be ok do you think? cab mounts and rivets are one point to go by based on frame drawing some have posted around the forums. i went by some other holes in crossmembers and frame to shock mount s very little to no variation on measurements. will do some more cross measuring.