[Camaroguy]

Now the fun part (for me) begins. Assembly of suspension. We went with a 4" drop leaf in the back with a 2.5" drop shackle. We did it this way instead of flipping it, but in retrospect, I would have probably flipped the axle on top and ran a stock spring. Also, we put a 9" inch rear end in it because it was the only axle housing we had that was the proper width. It currently has 3.73 gears. I also added rear disc's. I don't remember what brand they are but I ordered them from Summit. I used dupli-color caliper paint but thinned it a little and shot it through a gun.