The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

bdiamond · 04-28-2013, 08:49 AM

Just tap your flange for a 1/2 inch fine thread bolt and run it in from the back side. No knurl needed. But a 33/64= .515, that may work out with a 530 knurl

04-28-2013, 08:49 AM	#2
bdiamond Registered User Join Date: Sep 2007 Location: Wichita Falls, Texas Posts: 459	Re: Wheel Stud Knurl Just tap your flange for a 1/2 inch fine thread bolt and run it in from the back side. No knurl needed. But a 33/64= .515, that may work out with a 530 knurl