Re: 2WD C10 Modern/Performance Alignments
Ok. So I got the Thrust Angle in good shape. It was time to move onto the front. I took the time to go through all C10s from 60-87. These are Hunter Specs. Here is what I found:
1960-62
Camber: 0*00' to 1*00'
Caster: 0*30' to 1*30'
Toe: 0*08' to 0*15'
1963-78
Camber: -0*15" to 0*45'
Caster: 2*00' to 3*00'
Toe: 0*08' to 0*15'
Note: 1969-78 did not specify a caster angle. It also did not ask for a frame angle so I included them with the 1963-68 specs.
1979-81
Camber: -0*19' to 0*41'
Caster: Not specified
Toe: 0*08' to 0*15'
Note: Notice the camber range shifted to negative camber.
1982-87
Camber: 0*11' to 1*11'
Caster: Not specified
Toe: 0*08' to 0*15'
Note: What happened to camber here?
All trucks listed had a Specified Range of 0*15' to 0*30' for total toe
1982-87 was the only alignment that had a Specified Range for cross camber and cross caster. Both were -0*30' to 0*30'
Last edited by BMERDOC; 10-12-2011 at 09:52 PM.
|