The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

speedygonzales · 02-25-2018, 02:09 PM

My suggestion is to isolate the brake pressure warning switch and go from there.

On the bottom of the EBCM (says Kelsey Hayes on it) facing the master cylinder is a connector. It's below the top row of 3 brake lines and between the 2 lower lines. Disconnect that and do the same things you been doing to get the light to come on.

See if the light won't come on.

Let us know what happens

02-25-2018, 02:09 PM	#7
speedygonzales Registered User Join Date: Jan 2006 Location: Smithfield, VA Posts: 1,501	Could be several things My suggestion is to isolate the brake pressure warning switch and go from there. On the bottom of the EBCM (says Kelsey Hayes on it) facing the master cylinder is a connector. It's below the top row of 3 brake lines and between the 2 lower lines. Disconnect that and do the same things you been doing to get the light to come on. See if the light won't come on. Let us know what happens __________________ 99 Z71 (98 body style) Pride and joy Last edited by speedygonzales; 02-25-2018 at 02:19 PM.