Quote:
Originally Posted by lolife99
You need to buy a 3/16" male-to-1/4" female adapter to screw into the bottom of the porportioning valve. This will allow you to run a 1/4" line down to the "T" on the backside of the front crossmember.
I got mine at the local ACE Hardware store. They are specialty fittings. (Inverted flare adapters)
|
Purchasing a POL proportioning valve for disc disc. The new one has 3/8-24 thread 3/16 inv for the front and 9/16-18 for the rear. I am running stock lines. Is the adapter mentioned above what I need to make this work?
Thanks for your help