View Single Post
Old 09-18-2014, 09:13 PM   #5
Rascal_one2001
Registered User
 
Rascal_one2001's Avatar
 
Join Date: Dec 2006
Location: North Carolina
Posts: 308
Re: broken trans modulator bolt

If it's a th350 worst case you have to pull the transfer case to get clearance to drill it. If it's a th400 you should be able to unbolt front drive shaft and the cross member and lower the Trans enough to clear to drill just don't break your distributor. Or if the bolt is broken flush you can put a 5/16 nut over the broken bolt and weld the center so it welds to the damaged bolt and then the heat will help break it free.
__________________
1985 1500 454, 4l80e, 12 bolt, 5/6 drop, 20s
Rascal_one2001 is offline   Reply With Quote