The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Fred T · 08-04-2009, 01:31 PM

The AD series do not have a frame number. Just the cab plate and the engine serial, which are not the same.

Some states used the cab serial on the door pillar, some used the engine serial for registration. If you have the original engine, the serial is stamped in the pad that the distributor mounts on. So it should be just aft of the distributor base. Again, call the DMV to find out. The inspector should be able to tell you what to look for and where to find it.

In most states the DMV has their own VIN plates and they will attach one if you can meet their conditions.

08-04-2009, 01:31 PM	#7
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Re: help The AD series do not have a frame number. Just the cab plate and the engine serial, which are not the same. Some states used the cab serial on the door pillar, some used the engine serial for registration. If you have the original engine, the serial is stamped in the pad that the distributor mounts on. So it should be just aft of the distributor base. Again, call the DMV to find out. The inspector should be able to tell you what to look for and where to find it. In most states the DMV has their own VIN plates and they will attach one if you can meet their conditions. __________________ Fred There is no such thing as too much cam...just not enough engine. Last edited by Fred T; 08-04-2009 at 01:36 PM.