The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

TA_C10 · 02-13-2019, 12:16 AM

Here are a few more pics of inside the tank. Not really useful just curious what was going on in there while I had a 4.5" hole cut in the top

And I cleaned the tank out when I was done with a shop vac first. Then I put a couple strong magnets in the bottom, poured in some WD-40 lubricant, sloshed it around a bunch and that got all the rest of the shavings out. I poured out the WD-40 and wiped out the rest with a rag. Worked good.

02-13-2019, 12:16 AM	#106
TA_C10 Registered User Join Date: Jun 2018 Location: Texas Posts: 1,353	Re: TA_C10: Stage 1 Here are a few more pics of inside the tank. Not really useful just curious what was going on in there while I had a 4.5" hole cut in the top And I cleaned the tank out when I was done with a shop vac first. Then I put a couple strong magnets in the bottom, poured in some WD-40 lubricant, sloshed it around a bunch and that got all the rest of the shavings out. I poured out the WD-40 and wiped out the rest with a rag. Worked good. __________________ TA_C10 Stage 1 build - http://67-72chevytrucks.com/vboard/s....php?p=8333444 "It's only money".