The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

68GMCCustom · 11-29-2007, 01:44 AM

remove the plastic intake, and spray the throat and inside the throttle body (open the blade with your hand) using "throttle body cleaner". I use a lint free cloth to get the backside of the throttle body and edges of the blade. while your at it..."spray" your MAF clean with "Mass Air Flow Sensor Cleaner"... do not touch the little wires.

11-29-2007, 01:44 AM	#4
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: 03 SS problems remove the plastic intake, and spray the throat and inside the throttle body (open the blade with your hand) using "throttle body cleaner". I use a lint free cloth to get the backside of the throttle body and edges of the blade. while your at it..."spray" your MAF clean with "Mass Air Flow Sensor Cleaner"... do not touch the little wires. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken Last edited by 68GMCCustom; 11-29-2007 at 01:45 AM.