Quote:
Originally Posted by Captainfab
I didn't realize that the bar was that close to your diff cover. Lengthening the rod or moving the frame mount might be the best option.
|
Quote:
Originally Posted by PGSigns
If it were mine I would be making the bar longer by as much as I could get. It does help the clearance issue and also improves the roll center.
Jimmy
|
I'm going to go to the local metal place and see if they have round stock that is the same diameter. If so I'll get a few inches, cut my bar, and add in about 2" (will measure what I need first) and weld it back together.
Anyone have recommendations on where I can buy 1.5" bump stops to add on the rear frame?