View Single Post
Old 10-06-2014, 10:20 PM   #43
badchevy
Registered User
 
Join Date: May 2010
Location: San Antonio, TX
Posts: 102
Re: How about some pics of '73-'87 Short Beds Part II

Quote:
Originally Posted by Pura_Cheyenne View Post
I really appreciate it man, finally I found someone with the exact drop Im wanting to go for, If you say that I will clear the 3in drop spindles on hard dips then I'll think I'm gonna go for it, Oh and I need to ask, What size and brand flip kit did you buy for your truck, would really be helpfull. Thanks for the response, and Im really diggin that truck
The spindles are Belltech and the flip kit is McGaughy's. I also cut half a coil (sorry, I said one coil before) on the front for a 4" drop. Also had to trim the lower control arm to clear the rallies. Out back the flip kit dropped it 6". I left the stock shocks up front but put shorter shocks out back (sorry don't have the p/n for those). I also took off the bump stop with extender off out back and installed a regular 1 1/2" one from the parts store. If you are going to cut the coils too, you are going to get some rubbing on hard bumps.
badchevy is offline   Reply With Quote