View Single Post
Old 10-08-2014, 07:30 PM   #46
Pura_Cheyenne
Registered User
 
Pura_Cheyenne's Avatar
 
Join Date: Apr 2014
Location: Dalton,Georgia
Posts: 12
Re: How about some pics of '73-'87 Short Beds Part II

Quote:
Originally Posted by badchevy View Post
The spindles are Belltech and the flip kit is McGaughy's. I also cut half a coil (sorry, I said one coil before) on the front for a 4" drop. Also had to trim the lower control arm to clear the rallies. Out back the flip kit dropped it 6". I left the stock shocks up front but put shorter shocks out back (sorry don't have the p/n for those). I also took off the bump stop with extender off out back and installed a regular 1 1/2" one from the parts store. If you are going to cut the coils too, you are going to get some rubbing on hard bumps.
Nice, but how exactly do you trim the lower control arm? Sorry but Im 16 with a passion for these squarebodys. Hopefully you can get back to me with more info, would really appreciate it
__________________
Livin' Life With My Standards High,
But With My Chevy Low,
Pura_Cheyenne is offline   Reply With Quote