[Homebuilt Hotrods]

Recap on the 69 mustang 20 gallon tank. I picked it up off ebay and it was like 89 dollars complete shipped with pickup and sending unit lock ring ect. I trimmed 1 1/2" off the lower frame rail. Then I cut mocked it up and built some side brackets using 1 1/2" x 1/8" angle iron. I used some stock holes in frame that were a bit larger than the bolt hole I drilled for the support. I did this so I can tweek it right before I put in some bigger bolts. Also im in the process of mocking up a rear support for the frame since I "weakened" it a bit. I'm not sure what to do with a sending unit yet but at least it will hold gas.