Grounding Straps/Wires for motor
Hi Guys,
I am just completing the new wire harness install (carbed SBC in a 51 on a S10 frame) and was thinking about grounding straps.
Typically, I see a small ground wire (copper about 1/4 inch wide and 6 inches long) from the back side of a head to the firewall, and then sometimes a larger ground strap (copper about 1/2 inch wide and maybe 9 inches long) from the block to the frame.
Are 2 grounding straps enough?
what do you suggest?
Thanks for your help
|