The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

grillzy · 11-03-2017, 07:43 PM

Picture of passenger side seat belt area to wheel well and rear floor that is not remanufactured, so I had to make my own. All thicker material than new. This is also the first area to rot out on a 3 gen K5. Driver side is cut out. FYI the small hole in the new floor is to have access to the body mount nut just in case the nut spins or what ever I can replace without a guess cut. I will weld it shut after new body mounts and bolts are in.

11-03-2017, 07:43 PM	#29
grillzy Registered User Join Date: Jan 2014 Location: belleville ontario Posts: 354	Re: New to me 91 Jimmy Picture of passenger side seat belt area to wheel well and rear floor that is not remanufactured, so I had to make my own. All thicker material than new. This is also the first area to rot out on a 3 gen K5. Driver side is cut out. FYI the small hole in the new floor is to have access to the body mount nut just in case the nut spins or what ever I can replace without a guess cut. I will weld it shut after new body mounts and bolts are in. Attached Images Last edited by grillzy; 11-03-2017 at 08:21 PM.