Re: Installing door wire boot/bellows
Quote:
Originally Posted by 75C10
I have done this several times. Carefully remove the doors, drill the holes, feed the wires thru and then carefully reinstall the doors. Use screws to remount the conduits (bellows). Its not that hard with a 4x4 and a floor jack. I did mine by myself. Be careful and don't drop the door. Clean up sharp edges or you will have issues.
|
Do you remember which way the bellows were installed? One end has a big hole and one end has a small hole, not sure which end matches up to the cab.
__________________
1977 GMC Sierra Grande
|