Thread: S10 Swap how to
View Single Post
Old 06-16-2014, 09:54 PM   #3
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: S10 Swap how to

Now we get to the meat and potatoes of how this build works. Attached you will see my frame swap cab stands, complete with measurements and pics so they can be duplicated for your build. The following schematic is for 47-50 cabs. These were center mount cabs, you will need to weld a 6"x6" 1/4" plate on the bottom of the floor on each side to re-enforce the floor for the new cab stands.

If you have a 51-54 cab, you will need to remove 1/2" from the "above frame" portion of the rear cab stands and add a 1/2" delron spacer above the stock S10 body mount (this fits between the factory floor braces)

I bend the lower legs out at a 15deg. angle to decrease stress on the side of the frame

both these use the stock S10 body mount bushings above the cab stands.
Attached Images
   
Attached Images
File Type: pdf 1_1.pdf (77.7 KB, 7633 views)
skymangs is offline   Reply With Quote