Yes there is. And I see you have a 4 speed. So this makes it a bit harder or more critical on the bending. Here's an excerpt I posted on an older post.
If you look at my stick you will see it bends toward the driver. What you don't see, under the boot, is the stick has two 45 bends. So it comes off the transfer about 2" the takes a 45 bend to the driver for 4" the bends 45 back up through the boot. If you sit in the truck it looks like you wont be able to shift the trans if you put it into 4Lo. But the stick kind of drops down when shoved up into 4Lo. So the bends can be deceiving.
Here is a pic of my 205 stick.
j