The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**VetteVet** · 07-25-2018, 12:52 PM

L E D s are not dependent on heat resistance to flash as long as the correct flasher is used , and the polarity is maintained, and you are correct in that the front's are separate from the rears as far as the wiring. They are connected by the TS switch LF/LR RF/RR so the fronts or the rears should not have to be installed for the others to work. Unless the flasher unit demands it. The lights should illuminate anyway with correct wiring and good grounds.

07-25-2018, 12:52 PM	#2
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,703	Re: Light ? L E D s are not dependent on heat resistance to flash as long as the correct flasher is used , and the polarity is maintained, and you are correct in that the front's are separate from the rears as far as the wiring. They are connected by the TS switch LF/LR RF/RR so the fronts or the rears should not have to be installed for the others to work. Unless the flasher unit demands it. The lights should illuminate anyway with correct wiring and good grounds. __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.