Quote:
Originally Posted by nsb29
Only if you sand through to metal if that happens spot those places in with a reduced primer and then 600 The whole peas
|
Please explain this. I am blocking my parts now.
Here is what I have done....if you see any errors please lemme know
All pieces were sanded down to the metal...not blasted...sanded ( I know)
I put 2 coats of epoxy then 2 coats of 2k high build.
Blocked with 80g...found the low places then added filler ( Rage Gold) and blocked down with 80g. Once I thought it was straight I sprayed 2k primer again and blocked with 180 then 220 ( the stage Im at now)
I have burned through some areas down to the metal, not big areas more like the size of a quarter on some places.
I plan on spraying 2 more coats of high build then blocking with 320.
Thoughts?