The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Bartmans AD-S10 Chassis Swap

OrrieG · 10-31-2010, 11:14 PM

Nice job. In 85 I burned up a 1/4 drill using a wire brush on mine. Did not have a compressor at the time. Half way thru this project I discovered 3M purple disks. They look like oat mill but cut like crazy and do not scratch or mess up the metal. DA with 80 grit works good on the flats too. Something magical about going from bare metal to black frame paint.

10-31-2010, 11:14 PM	#32
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Bartmans AD-S10 Chassis Swap Nice job. In 85 I burned up a 1/4 drill using a wire brush on mine. Did not have a compressor at the time. Half way thru this project I discovered 3M purple disks. They look like oat mill but cut like crazy and do not scratch or mess up the metal. DA with 80 grit works good on the flats too. Something magical about going from bare metal to black frame paint. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project