The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**First c10** · 05-05-2016, 03:56 PM

Hey Brett. I was looking at that same page last night. I found what I need just need to order it.

I was able to disassemble the original choke cable and replace with a longer cable so it would fit the Holley. So the dash will look the factory down to the choke cable and knob.

I cut and welded up the throttle linkage I had that was 3-1/2" to long. Now it fits great and has 3 inches of adjustments still. I do need to install a spacer so I can adapt from a 1/2" to 1/4" rod. I think I am going to make something.

When done I will post a few pictures.

05-05-2016, 03:56 PM	#119
First c10 Senior Member Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project "Hulk Jr" Hey Brett. I was looking at that same page last night. I found what I need just need to order it. I was able to disassemble the original choke cable and replace with a longer cable so it would fit the Holley. So the dash will look the factory down to the choke cable and knob. I cut and welded up the throttle linkage I had that was 3-1/2" to long. Now it fits great and has 3 inches of adjustments still. I do need to install a spacer so I can adapt from a 1/2" to 1/4" rod. I think I am going to make something. When done I will post a few pictures. __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!