The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

geezer#99 · 01-26-2020, 11:28 AM

Before you drill any holes have you considered the position of the trans in the frame.
They aren’t normally installed dead centre between the frame rails but are offset to the passenger side.

01-26-2020, 11:28 AM	#7
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,516	Re: TKO 600 going in Before you drill any holes have you considered the position of the trans in the frame. They aren’t normally installed dead centre between the frame rails but are offset to the passenger side.