|
Re: Camaro Clip Measurement. Help!
Quote:
Originally Posted by rapid49
I just went thru this. Ride height , tire diameter and personal preferance come into play . I think that the only way to be sure you get it exactly the way YOU want it is to mock it up . Set the ride height with the tire size you want to run and hang the fenders . Stand back and look at it awhile. If you have to reassemble to mock it it will be worth it in my opinion . Here are a couple of pics of mine. The first pic shows the clip moved 1" forward of the original location . The second pic is moved forward an additional 3/4''. It's really all about how you want it to look. That's why I wouldn't use somebody elses measurements.
|
YEP!
I tacked mine into place with all the measuring and THEN I installed the front fenders and took a look.  I had to cut it loose and move it forward a half inch or so. There is NOTHING that looks worse than the tire not in the proper position in the fender arch.
Brian
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.
"Fan of most anything that moves human beings"
|