Quote:
Originally Posted by jamie72
so what leds did you use?
|
Simple ones sold by jtechnowcom on ebay. I think a set of 10 cost less than $7. I didn't want to spend too much in the event they wouldn't do the trick. I might upgrade to better quality LEDs in the future, but for now they are really doing the job.
These are the ones I used:
https://www.ebay.com/itm/10x-T10-8-S...72.m2749.l2649
And FYI, if all you want to do is to upgrade the instrument illumination (194), a set of 4 would do the trick. With a set of 8 (you only need 7) you can do the instrument illumination, high beam indicator and the brake and temp warning lights. The turn signals (1895), heater controls (1445) and glove box (1445) bulbs are a different design and you have to get different bulbs if you want to do those too.