The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**HO455** · 11-24-2016, 08:01 AM

There was one additional issue with the belts. The L brackets are powder coated but the shoulder bolts that fastens them to the floor won't fit in the hole. The coating has to be scraped out of the inside of the bottom hole so the shoulder on the bolt will fit inside it. Hopefully that will be all of the problems. I still have to bolt the other end down and start using them to be sure

11-24-2016, 08:01 AM	#126
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 10,820	Re: Working Man's Burbon There was one additional issue with the belts. The L brackets are powder coated but the shoulder bolts that fastens them to the floor won't fit in the hole. The coating has to be scraped out of the inside of the bottom hole so the shoulder on the bolt will fit inside it. Hopefully that will be all of the problems. I still have to bolt the other end down and start using them to be sure __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban the WMB,1991 S(stink)-10 Blazer,1969 GTO, 1970 Javelin, 1952 F2 Ford 4X4, 29 Model A, 72 Firebird. 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377