The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1969 C10 SWB

NoNeck · 07-28-2017, 07:26 PM

We have all the vents installed for the Vintage Air system and ready to finish up under the dash. The copper oil pressure line has been installed (thanks LockDoc), the brake lines are complete and all the wiring is in. A new 100 amp one-wire alternator has been installed all the drive belts have been sorted out. The Painless Electric fan kit is wired and the thermostat installed to kick on at 195° and kick off at 185°. With the 4 core aluminum radiator and dual fans the truck should stay really cool.

We need to bleed the brakes, install a vacuum fitting on the intake for the brake booster and fill the tank with some 93 Octane non-ethanol gas.

Stay tuned...

POP

07-28-2017, 07:26 PM	#865
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,105	Re: 1969 C10 SWB - Big Block project We have all the vents installed for the Vintage Air system and ready to finish up under the dash. The copper oil pressure line has been installed (thanks LockDoc), the brake lines are complete and all the wiring is in. A new 100 amp one-wire alternator has been installed all the drive belts have been sorted out. The Painless Electric fan kit is wired and the thermostat installed to kick on at 195° and kick off at 185°. With the 4 core aluminum radiator and dual fans the truck should stay really cool. We need to bleed the brakes, install a vacuum fitting on the intake for the brake booster and fill the tank with some 93 Octane non-ethanol gas. Stay tuned... POP Attached Images __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.