Quote:
Originally Posted by cg285
and .010 gap should not read a 31 degree dwell but if your dwell meter is accurate that is all that counts
|
Well I set them at .019 and got 21*, so I reset a little closer and got 27*, resetting again even closer, I came up to 31*. When I measured the gap it looked like .010.
Is there a way to test a dwell meter? It's a Sears Roebuck Dwell-Tach-Voltmeter, I've had a while.
Points and condensor -- whole breaker plate actually -- is old USA-made Accel.