Quote:
Originally Posted by Green Monster
Thanks for sharing your experience. I was not considering replacing the springs until I saw your posts- very informatuve. This is a good time to install seat warmers too.
The rolls come in 10' lengths. How many rolls of 9 guage and 11 guage springs did you need to purchase to replace the springs in the front seats?
Also, what tool did you use to bend the ends of the springs where they're clipped into the frame?
|
It took 2 rolls of each.....I cut them with an abrasive wheel and I made a little block that I could clamp in the vise to hold the spring....
then I just bent them with a few taps of a hammer....
all it takes is a slight bend to prevent them from slipping out of the frame
these are approx ½ x ½ steel bar