Re: It's my turn, 47 S10 build
As it sits I'm about 90% sure the brake pedal mount is going to play well with the chassis braces. I kept the factory pedals and mount from the 47 chassis. I wasn't sure at the time if there was a pre made Mount for what I needed and most of them looked really universal.
The first step was to determine where the pivot is supposed to be. Before I pulled the old pedal mount I cut a line in the top inline with the front body Mount holes. About 3 1/4" ahead and about 2 inches down from the cab mount hole is where the pivot lines up. With the pedals and pivot shaft wired up in place it looks like if I notch the top of the tube it will line up really well. Tie it into the cab mount and down to the frame and it should be solid.
|