The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

storm9c1 · 05-28-2013, 11:35 AM

I verified that the stock Vette ones will work, but you will have to fab new pipes. It gets tricky with clearance at the first bend, but it is do-able. You will have to use a mini-starter (Nippon-Denso) style at the very least. You may also have to grind off some casting at the flange, grind the frame, or just loosen the engine cradle brackets and wrestle the engine over about 1/16". Fitment varies by truck.

05-28-2013, 11:35 AM	#60
storm9c1 * That's interesting * Join Date: Oct 2008 Location: Pittsburgh, PA Posts: 2,772	Re: Rams horn exhaust manifolds I verified that the stock Vette ones will work, but you will have to fab new pipes. It gets tricky with clearance at the first bend, but it is do-able. You will have to use a mini-starter (Nippon-Denso) style at the very least. You may also have to grind off some casting at the flange, grind the frame, or just loosen the engine cradle brackets and wrestle the engine over about 1/16". Fitment varies by truck. __________________ Tom Chevy by day... 1969 Chevy C30 Rollback Tow Truck -- 383 stroker, 4L80E 2011 Chevy Caprice PPV 9C3 6.0L 1995 Chevy Caprice 9C1 1994 Chevy Caprice 9C1 #3 1995 Chevy Caprice Wagon #2 1995 Chevy Impala SS Mopar by night... 1969 Dodge Charger 1972 Chrysler Newport 2dr Hardtop (27K miles) Plus others...