The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Lks Dcvn

**lks dcvn** · 02-19-2017, 08:12 PM

The blazer made it safely to start the body work. After removing the orange tub from the body it became apparent that the tub would be a lot of work so the Blue tub was sent down last week to use instead and the spare 1970 2wd chassis was also sold.

The original 2wd chassis has been media blasted and is pending powder coat. The blue tub will be blasted, mated to the frame with Wes's new blazer body mount kit and then body work started with the top in place.

I ordered up some Dead End Garage bolt in exhaust cutouts for the x-member and a red head steering gear box this week. They are on their way as the frame is going to be put together with new MOOG parts as well as the ECE 2.5/4" static drop.

02-19-2017, 08:12 PM	#64
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,338	Re: Lks Dcvn - 1972 2WD Blazer Build The blazer made it safely to start the body work. After removing the orange tub from the body it became apparent that the tub would be a lot of work so the Blue tub was sent down last week to use instead and the spare 1970 2wd chassis was also sold. The original 2wd chassis has been media blasted and is pending powder coat. The blue tub will be blasted, mated to the frame with Wes's new blazer body mount kit and then body work started with the top in place. I ordered up some Dead End Garage bolt in exhaust cutouts for the x-member and a red head steering gear box this week. They are on their way as the frame is going to be put together with new MOOG parts as well as the ECE 2.5/4" static drop. Attached Images Last edited by lks dcvn; 05-02-2019 at 02:51 AM.