View Single Post
Old 06-26-2018, 04:13 PM   #17
GSP7
Registered User
 
GSP7's Avatar
 
Join Date: Sep 2012
Location: Idaho
Posts: 621
Re: Advice on this gun

https://sprayfinishingstore.com/prod...starting-line/

Quote:
The FinishLine FLG-5 also targets automotive refinishing but with Trans-Tech(LVMP) air caps instead of HVLP and a lower number of nozzle sizes. However, the air consumption can be around 30% lower which should be considered when choosing the right air compressor.

The FinishLine FLG-4 is also suitable for automotive refinishing (1.3, 1.5, 1.8mm for base coat, clear coat & primer) but also for general industrial finishing applications. The nozzle size of 2.2mm and the option of conventional air atomization allows the spraying of higher-viscosity materials, also in connection with a pressure tank if needed.
__________________
'81 K20 Silverado , '99 Dodge Cummins 4x4, '05 Dodge Cummins 4x4,

Pinstriping-Lettering-Specialty Painting

Last edited by GSP7; 06-26-2018 at 04:19 PM.
GSP7 is offline   Reply With Quote