Re: TDA-stamped rear end to posi conversion?
Quote:
Originally Posted by jcwren
Thanks for the confirmation Time to go shop for a posi.
I thought I had a line on one a guy bought that wasn't correct for his truck, but it turns out his is a 28 spline for '73 and up. Woulda saved $150 if had been the part I needed...
|
If it was a 28 spline it would have been for an 8.5” 10 bolt as the truck 12 bolts were always 30 spline. And the 10 bolt didn’t show up until 1981 or so in the back of the 1/2 ton trucks. And they went to 30 spline in ‘88. But not interchangeable with a 12 bolt at any point.
Consider a Detroit TruTrac as well as the clutch type LSD.
__________________
44 Willys MB
52 M38A1
64 Corvette Coupe
68 Camaro 'vert LT1 & TH700
69 Z/28 355 12.6's @110
69 Chevy Short Step 4 1/2"/7" drop
72 Jimmy 4WD 4spd 4" & 35's
02 GMC 2500HD 4x4 Duramax
|