The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Steel Fuel Line from Pump to Carb (SBC 350)

Dead Parrot · 02-22-2018, 04:58 PM

I have a similar situation, 1405, Eddy manifold + 1" spacer, and would like to get rid of the short rubber hose from the cut off OEM metal line to the carb.

There are hard lines that include a filter housing that end about where the OEM line takes the bend to the Qjet. Haven't found a pre-made metal line to run from the pump to that end. Found a few flex line options. But that just flip-flops the metal/rubber parts.

02-22-2018, 04:58 PM	#2
Dead Parrot Registered User Join Date: Aug 2012 Location: Oklahoma City, OK Posts: 2,476	Re: Steel Fuel Line from Pump to Carb (SBC 350) I have a similar situation, 1405, Eddy manifold + 1" spacer, and would like to get rid of the short rubber hose from the cut off OEM metal line to the carb. There are hard lines that include a filter housing that end about where the OEM line takes the bend to the Qjet. Haven't found a pre-made metal line to run from the pump to that end. Found a few flex line options. But that just flip-flops the metal/rubber parts.