The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

mikeoj · 11-26-2001, 08:54 PM

Boog.I can tell you from experience.I used dropped spindles/disc on a 69 c-10 using the stock ball joints.They increased my front track width approx 2in. per side.Got around it by using dif.offsets on rims!
These spindles were meant for stock ball jts and newer tie rods.Wouldn't do it like this again,but,live and learn!!!

11-26-2001, 08:54 PM	#7
mikeoj Senior Member Join Date: Nov 2000 Location: WI,USA Posts: 495	Boog.I can tell you from experience.I used dropped spindles/disc on a 69 c-10 using the stock ball joints.They increased my front track width approx 2in. per side.Got around it by using dif.offsets on rims! These spindles were meant for stock ball jts and newer tie rods.Wouldn't do it like this again,but,live and learn!!! __________________ 69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc.