The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

95 S_Trucker · 08-08-2017, 06:08 AM

You will have to use the wiring from the 90. You will most likely need to use the inner doors from the 90. While you have everything apart, you should swap the lock cylinders too.

08-08-2017, 06:08 AM	#2
95 S_Trucker Registered User Join Date: Oct 2009 Location: . Posts: 2,178	Re: Swapping doors question You will have to use the wiring from the 90. You will most likely need to use the inner doors from the 90. While you have everything apart, you should swap the lock cylinders too.